menu
Hot Recycling Pavement Maintenance Vehicle
Hot Recycling Pavement Maintenance Vehicle

Hot Recycling Pavement Maintenance Vehicle

CONTACT NOW
Features Main Parameters Construction Case Related Products


Brief introduction of The hot-recycling pavement integrated maintenance vehicle

The hot-recycling pavement integrated maintenance vehicle series is able not only to use 100% of the Rap material, cold-mix material, and pavemill material as raw materials for recycling but also to mix the new-material (asphalt and aggregates) into asphalt mixture to be used. Its greatest advantage is to save precious pavement materials, to achieve resource recovery, environmental protection and reclamation, greenness and low carbon, and to eliminate pollution of cold-mix asphalt It also the transportation cost of the RPA material.

Features of The hot-recycling pavement integrated maintenance vehicle

1. It can be used to regenerate the waste material produced by excavating pit trough directly, realize 100% recycle and use of waste materials, and reduce the maintenance cost significantly;
2. Cold material Heating: Cold-State asphalt mixture can be heated to 140~160℃ to be used, and the heating time of each pot should be 8-12min only;
3. New material mix: it can produce new asphalt mixture;
4. Bitumen tank equipped with the heat conduction oil heating system, which can heat evenly to prevent asphalt coking aging;
5. Asphalt piping System with self-priming refueling, emptying, spraying and grouting function, use heat-conducting oil insulation to prevent blockage.
6. It can spray emulsion bitumen and hot bitumen as an adhesive layer;
7. Equipped with hydraulic power output interface, can provide power to ancillary machines;
8. PLC Intelligent control System, feeding, heating, spraying, stirring, discharging can be "one key automatic" completion, reduce labor costs.

Model

LMT5120TYHZ

LMT5110TYHZ

Dimension(L*W*H )mm

7180 x 2240 x 3450

7540x2250x3900

Asphalt Pump Capacity(L)

1000

1000

Lifting Hopper Capacity(kg)

200

340

Asphat Tank Buner porer(×103kcal/h)

100


Auxiliary Engine power(kw/rpm)

31/3200

45.6/3200

Approch /Departure

27°/12°

27°/12°

Kerb Mass(kg)

8760

9720

Max. Speed(km/h)

90

600

Fuel Consumption per Hundred Kilometers (L)

<16

<16

Mixing Pot Capacity(jkg)

600

1000

Mixing Pot burner power(×103kcal/h)

260

260

Discharging Temperature(℃)

120~170

120~170

SpecificFuel consumption(kg/t)

6~7.5

6~7.5

Leave a Message Email Us

we will contact you within 24 hours.

Contact Us
  • +86-571-87177003
  • metonggroup@metong.com
  • Room 2201, Building 2, Qiantang Aviation Mansion, No.6, Shimin Street, Hangzhou, China