menu
Chipping Spreader
Chipping Spreader

Chipping Spreader

CONTACT NOW
Features Main Parameters Construction Case Related Products


Hanging chipping spreading is hanged on the back of the self-discharging truck and fitting with bolt. Chip spreader is mainly applied for the spreading work. It adopts the penetration method to spread the aggregate,  powder, chips, girl. macadam and asphalt macadam to the prim coat,undersealing layer, chip seal, and micro-surfacing of the pavement.


Features of Chipping Spreader

1. The chip spreader has 10 gates. Each gate is controlled by the independent cylinder while every cylinder is controlled by the independent on-off switch could indirectly control the gate through controlling the cylinder.
2. Each gate is equipped with micro-adjusting mechanism to control the garage. Then the chip spreading speed could be controlled to adjust the uniformity degree of spreading.
3. The special anti-skidding device for the roller keeps the spreading well–distributed.

Category

Item

Parameter

Basic technical parameter

LxWxH(mm)

2500×2000×1900

Total mass(kg)

1150

Spreading width(mm)

250~3100

Macadam diameter(mm)

6~25

Spreading volume(m3/km2)

3~22

Speading speed(km/h)

3-4.8

Spreading density

adjustment

Hydraulic system

Engine

GX270, 5.1Kw

Gear pump

CBN-E310

Cycloid motor

OMP250

Flow divider valve

D06KRF025G12MM001


Chip-spreader-in-China-2.jpg
Leave a Message Email Us

we will contact you within 24 hours.

Contact Us
  • +86-571-87177003
  • metonggroup@metong.com
  • Room 2201,Building 2,Qiantang Aviation Mansion,No.6,Shimin Street,Hangzhou,China